OBD2 USB Diagnostic Cable with Switch

Power Mode: Other
Operating Voltage: ≤36V
Battery Properties: Without Battery
Applicable Models: See Product Details

Technical Details: 1Latest ELM327 version for greater For Ford compatibility 2Manufactured modification to include a For Switch to connect to different CAN buses 3Designed for FORScan software 4Compatible with software venders; FORScan, Elmconfig, FF2 and FoCCCus, plus more 4MS CAN bus and HS CAN bus support 5Drivers and instructions includedProduct Description Introduction: One ELM327 OBDII OBD2 USB with For Switch. Designed for communicating with For Ford, For MAZDA, For LincoLn and For MERCURY vehicles. With this cable and the one of the supported software vendors you can detected modules which are not visible for regular OBD2 scanners. This includes showing you trouble codes, PIDs, running tests and services procedures which are never displayed by other OBD2 scanners and a standard ELM327.Basic Features: Reset fault /trouble codes / parameter ids (PIDs) Change car configuration data Run tests Services procedures Program certain models   Pin Configurations: Switch position one: HS CAN - Occupies pins 6 and 14 Switch position two: MS CAN - Occupies pins 3 and 11   Supported Software: FORScan Elmconfig FoCCCus FF2 Plus moreModified EML: Please note that many For Ford and For MAZDA models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular HS CAN bus. In contrast to HS CAN bus, MS CAN bus is not supported by the stock ELM327, because MS CAN is a manufacturer-specific solution and located on non-OBD2 pins. This ELM327 has been modified to allow it to implement the MS CAN bus. ELM327 supports HS CAN from the stock, because For Ford HS CAN completely matches to the OBD2 standards. It occupiesSupported Vehicles: All For Ford, For MAZDA, For LincoLn, For MERCURY vehicles that can be addressed using an ELM via an OBDII connector.   Supported Protocols: For Ford HS CAN For Ford MS CAN   Other Details: Cables fully tested on supported model before shipping. No responsibility can be accepted for any damage caused by the lead.